Thank you so much Don. Your answer clarified everything about this upgrade for me. I will swap out the entire board.
Cheers, Nick NT1A On 12/5/2011 9:20 AM, Don Wilhelm wrote: > Nick, > > The little K3DSPLPF will take care of the high frequency part of the > spectrum just the same as the DSP Board swap, BUT, it will not extend > the low frequency response. > > So, the answer depends on what you want to accomplish - if you want > both the high and low frequency changes in your K3, then the DSP Board > swap is the easiest way to accomplish that. > > 73, > Don W3FPR > > On 12/5/2011 9:04 AM, Nick Thomas wrote: >> Hi Gents, >> >> I have an early K3 - serial # around 400. Do I need to swap the entire >> DSP board out for a Rev D board or is the little mod kit *"K3DSPLPF" >> *that is sold for $40 going to do it for me? >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
