Elecraft; Please modify the K3 so I can set it in DX mode and go watch my favorite TV show while it works DX or contests for me. That way I wouldn't have to learn or use any skills, watch the P3, turn the VFO, speak into the mic, send CW, log contacts, upload my log to eQSL and LOTW or the contest sponsor.
After the event I would be able to have long discussions with the owners of the other rig brands about how much smarter my K3 was that theirs. Could you have this completed before the next contest? Afterall, it would just be a firmware change, right? ;-) 73, Tom Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member "If somebody has a bad heart, they can plug this jack in at night as they go to bed and it will monitor their heart throughout the night. And the next morning, when they wake up dead, there'll be a record." --Mark S. Fowler, FCC Chairman, 1981 - 1987 On Wed, 07 Dec 2011 10:54:18 -0500, drewko <[email protected]> wrote: >No. But I would like to be able to define a temporary frequency >segment that the VFO would be restricted to. This would be useful for >split tuning through pileups: finding the current caller to a DX >station or just finding an open spot for oneself. > >One the segment limits were set up you could just turn the VFO knob >without looking at the frequency display and always remain within the >pile. As you hit either end of the temporary segment the frequency >readout would reset to the opposite end of the segment and keep going, >so you wouldn't have to pay any attention to the readout at all; just >turn the knob and listen. A sort of manual scanner. > >73, >Drew >AF2Z [snip] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
