It's useful for checking your transmit equalization with a specific voice and microphone. At N1AL, I discovered that I had way too much bass so I adjusted the K3's TX equalizer to make it flatter.
As Joe says, it does not include the effects of amplifier distortion. And as Knut says, the signal level depends on random leakage through the mixer and PIN diodes, so it varies with band, drive level settings, and sample-to-sample variation of the particular K3. There's no guarantee that there will be enough signal available to be useful. That's the main reason I resist making it an "official" feature. Alan N1AL On Wed, 2011-12-07 at 09:36 -0800, ab2tc wrote: > It's also a result of internal leakage paths so I am not sure that it can > even be trusted to be representative of the signal delivered to the output > stages of the transmitter. > > AB2TC - Knut > > > Joe Subich, W4TV-4 wrote > > > > If the RS-232 cable is not installed between the P3 and K3 the P3 > > will not "mute" during transmit and one can see the transmit IF. > > > > Note - this is *not* a transmit RF display as it does not show the > > effects of the final mixer, driver and/or final so any IMD/clipping > > generated in the final amplifier is not reflected in the display. > > > > 73, > > > > ... Joe, W4TV > > > > <snip> > > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/Transmit-Audio-tp7071119p7071354.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
