Elecrafters
I have been using the KPA100 for a while and the K2 QRP top has been sitting
quietly in its box for a few months. Last night I decided to reconnect it for
potential portable use and the the K2 does not recognize its presence- (i.e.
the menus for the KAT2 do not show up). I decided to unplug and re-plug the
connectors while the K2 top is standing next to the K2 and lo and behold, the
K2 recognizes it on the menu. As soon as I bolted the top on - the K2
un-recognized the KAT2. I went through the routine of unplugging and
re-plugging the 12V and RF connectors but as soon as I tightened the top screws
the KAT2 was no longer recognized. Has this ever happened to anyone in the
reflector? Perhaps someone can shed some light to steer me to solving this
problem.
Ariel NY4G
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
