P3 @ 38,400 on a real serial port, Win 7 Pro, P3 Utility v1.3.8.25 If I do a screen Freeze using an FNx button I have set for Freeze
Then do a [Capture Image] while P3 in the tracking mode, after the image capture is complete if I click on File and then Save as or if I simply wait about 10 seconds the P3's screen blanks everything is there except no wave form is viewable at the same time the tracking mode switches to Fixed-tune mode I can just tap the MKR A button and the waveform comes back on but the really annoying thing is I'm still stuck in Fixed-tune mode I have a FNx set to switch back to tracking mode but that is just one more thing to do to get back to where I can take another capture I'm using this with Peak and then taping the Fnx for Freeze off and on until I can grab/freeze the yellow instant wave form I want in the capture, along with the cumulative Peak readings in blue, before I hit the [Capture Image] button if I have peak running and then hit [Capture Image] I know it freezes the screen, *and it doesn't cause the Fixed/Tracking mode shift) but if it wasn't the (instantaneous waveform) shot I wanted I also have to wait 35 seconds before I can try again to capture what I wanted hope all that makes sense to you. -- GB & 73 K5OAI Sam Morgan ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html