Ron, Check your keying line from the Flex-5000 to the KPA-500. If the PTT line is not connected I would expect to see the problem your experiencing, Jim K2ZF
-----Original Message----- From: Ron D'Eau Claire <[email protected]> To: vtnn43e <[email protected]>; 'Elecraft List' <[email protected]> Sent: Tue, Dec 27, 2011 6:10 pm Subject: Re: [Elecraft] KPA500 was working now it’s not Zack, what does the display indicate when you tap HV? Ron AC7AC -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Tuesday, December 27, 2011 7:34 PM To: Elecraft List Subject: [Elecraft] KPA500 was working now it’s not Powered up my KPA500 today for the first time today and it was working ok with my Flex-5000. Got 500 watts out on 40 to a dummy load and everything seemed ok. Powered the rig and amp off then on and all of a sudden get only 35 watts out for 35 in. Does not matter what band I Put my rig on as I only get out what I put in. Don’t see any errors and the amp is in OPER. There are no faults BTW. Anyone have any thoughts as to why I no longer get any output from the amp? Zack N8FNR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
