I suggest you use the N6KR method to set the 4 MHz reference oscillator. Refer to my website www.w3fpr.com article on K2 Dial Calibration. Note that the actual frequency may not be at 4 MHz.
You may use any AM station that has a known carrier frequency rather than WWV. If you use a standard station that transmits only a carrier, you will still have to use SSB mode, but switch to CW to adjust the pitch equal to your sidetone pitch. 73, Don W3FPR On 1/4/2012 8:38 AM, EB1TR wrote: > Hello to all, this week (my last hollidays week) I thought it would be a good > idea to adjust the oscillator 4MHz my K2. > > I performed the steps as it is described in several ways but the result is > always the same. > > 40 meters LSB 200Hz shift > 40 meters USB 1.5KHz shit > > In other bands the results are always similar. Any ideas? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
