Hi Bud, I suspect that VFO-B is in a different mode. (You can view VFO-B information mode by pressing BSET). To quickly solve this problem I just pressed the A-B (#3) button twice. The first push sends transfers VFO-A frequency to VFO-B and the second push transfers other information such as mode and maybe filter width. (See manual page 15).
73, Mike K2MK Bud Governale, W3LL wrote > > When in Data Mode PSK-D (31 bps) I get SPL N/A when trying to operate > split. > Both VFO's were on the same frequency but could not get VFO B to go up. > > What do I need to do to go into split operation in this mode? > > Today VK0TH was operating on 28,121 MHz and listening 400 Hz up. > I just could not get into split mode. > > 73, > > Bud W3LL > w3ll@ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-PSK-D-Split-Operation-tp7156597p7156784.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
