I don't where to start. I have a K3 that is nearly loaded and I decided to add a couple of more options. I installed the KDVR3 and KXV3A in preparation for a P3 in the near future. I activated both units via the CONFIG menu and the KDVR3 was recognized. I was able to do the calibration of the KXV3A using the utility software and it checked okay at all three power levels. I made a couple of contacts and all seemed well.
Here is were it gets weird... I noticed that the SUB RX would no longer work independently (CONFIG: set to YES) as it did before I added the latest components. So, I decided to pull the cover off and remove the SUB RX unit to be sure everything was connected. I reinstalled the SUB RX and confirmed that all appeared well visually. Now, I have zero output on my watt meter and the VFO's are still not working independently. If I equalize the VFO's, I hear the same station on both speakers alternately. However, If I rotate the B VFO the display changes frequency but the it does not actually change the RX frequency. Things that I've tried: I've restored from my last settings backup and installed latest firmware again. I've reset the processor to factory condition (still no output). I've restored again to a backup version of the settings using the utility software. I've done the CONFIG:VCO routine for both receivers as suggested in the troubleshooting section. I've attempted to do the Transmitter Gain Calibration a second time today and it does not work (errors out after 8 seconds). It did work earlier today before I lost all output. I DID at some point today use the CONFIG:KXV3 TEST feature as I was fishing around for solutions. I'm now sure what exactly this means but it may have something to do with my current situation. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
