Hello All! My friend and I spent yesterday aligning my Norcal 40A and recently finished K2/10 #7164. We really did not play too much with the K2 after we finished aligning as we were also working on some other things in my shack.
When I was starting to really get to know the ins and outs of the radio, I noticed that the power out indicated on the display when you adjust the power knob is much higher as indicated on my QRP Wattmeter. I set the radio to around 2.0 W, and the Wattmeter is showing around 5W. When I was at about 5-6 W, I pinned the needle on the Wattmeter. We followed the manual to a "T" and used a frequency counter, my Wattmeter, a 'scope, and signal generator to do the alignment. Any ideas? Thanks & 73, David KC9EHQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
