Once again Don you're there to the rescue. Thanks very much for the very quick response.
We have a saying over here when one doesn't see the obvious and that is I "Should have gone to Specsavers". The bottom will be coming off shortly and a check done Once again thank you. Regards Nidge (G0NIG) IO93dv -------------------------------------------------- From: "Don Wilhelm" <w3...@embarqmail.com> Sent: Thursday, January 12, 2012 1:18 PM To: "Nigel (Nidge) Smith" <nig_sm...@o2.co.uk> Cc: <elecraft@mailman.qth.net> Subject: Re: [Elecraft] K2: Intermittent fault on 15m and 12m. > Nidge, > > There is one link between 15 and 12 meters, and that is relay K6 which > should be set on both bands. > Those are latching relays, so you can set to the band, power down and > check the continuity at the relay pins. > > 73, > Don W3FPR > > On 1/12/2012 8:04 AM, Nigel (Nidge) Smith wrote: >> >> Hi All >> >> Once in a while I have an issue with my K2 on 15m and 12m in that >> there is no receive and, according to the internal power metering, >> next to no transmit. As I say this is intermittent. >> >> The radio is currently in it's QRP format with an internal battery >> fitted. >> However this issue crops up even when the supply is external and the >> KPA100 is installed. I could probably understand it if it was on 17m >> and 15m or 12m and 10m as the bandpass filters and relays are shared >> but, and maybe I haven't looked hard enough, I can't see the link between >> 15m and 12m. >> >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
