Have you tried removing power from the K3 and then power it on? 73, Bill K9YEQ
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David Guernsey Sent: Thursday, January 12, 2012 3:00 PM To: [email protected] Subject: [Elecraft] [K3] Stuck in Transmit My K3/10 is stuck in transmit. I recently changed power strip/surge protector for the power supply to a strip that uses one of the pieces of equipment as a control to turn all the others on and off. I have my Mac Mini as the control piece of equipment with the monitor and printer power controlled by the computer. The Astron RS-35M, which supplies power to the K3, is in a non-switched plug on the power strip. I have read the K3 Owners Manual and can not find any solution for the problem. I have checked that K3 is not in VOX, and that the PTT is not stuck. Additionally, if I go into the MENU or CONFIG modes, the VFO B knob does not change the display, so I cannot check the configuration. Any help would be greatly appreciated. 73 de Dave KJ6CBS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
