Hello, Wayne. If you were sending the proper serial number, your first KX3 built-in RTTY mode contact was with me. The serial number you sent was 001. I was running a K3 at 100 w using FSK-D also. I sort of thought the call looked familiar. It was a good contest.
73, Randy, K7TQ Moscow, ID ----- Original Message ----- From: "Wayne Burdick" <n...@elecraft.com> To: <k...@yahoogroups.com> Cc: "Elecraft Reflector" <elecraft@mailman.qth.net> Sent: Saturday, January 14, 2012 9:17 AM Subject: [Elecraft] First QSO using the KX3's built-in RTTY mode > The KX3 will have the same built-in RTTY and PSK31 modes as the K3: > just set the DATA mode for FSK-D or PSK-D, and turn text decode on. > You can then send CW with either the attached paddle or an external > paddle and the KX3 will convert it to RTTY or PSK31. The VFO B display > is alphanumeric, and it can display on-air data signals. No computer > needed. > > I just made the first QSO using the KX3's RTTY mode (FSK-D), running > 12 watts. Lots of activity in the 20-meter RTTY zone today (14080-4090). > > I'll be monitoring 14085.00 while working on firmware today in case > anyone wants a rare 6-land RTTY QSO :) > > 73, > Wayne > N6KR > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.1901 / Virus Database: 2109/4742 - Release Date: 01/14/12 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
