I don't understand. With the K3/KPA500 there is no knob on the KPA500 but if you want to change the power level you just turn the power knob on the K3. The K3 can remember that level the next time you return to that band if you wish. A power knob on the KPA500 would be redundant and superfluous.
If the KX3 and its amplifier are set up similarly, and I suspect they will be, then there is no need for the control. And anyway, putting that control on the amp would constrain where you could place the amp in order to use the power control. Does your issue arise because you want to use the amp with something other than a KX3 and that other rig has no easy way to control its output power? David K0LUM At 9:56 AM -0600 1/19/12, Richard Fjeld wrote: >A power limit switch would be fine, but I would still want to have a >linear control so that I could dial up my desired power level. >Perhaps the limit control could be menu selectible. > >Dick, n0ce >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
