I use LP-Bridge v1.02 and NaP3 with my K3 and softrock my Global settings differ Global offset has to be set at -23070 the rest are the same as Tony's.
I have tried to use LPB2 v1.01 and neither the -6000 or 23070 settings work for me for starters receive is on the wrong side no matter which LSB or USB and checking or un-checking I/Q shift doesn't fix it after playing a while PERHAPS if I set the global for -6000 and then played with each mode's setting individually, I could get it to work much to much effort I finally just settled for running LP-Bridge v1.02 and NaP3 works great. -- ymmv Sam Morgan K5OAI Tony Estep wrote > > Stewart, my NaP3 setup calls for > Sampling rate 96000 > then on the IF freq page: > Global offset -6000 > LO Center 8215000 > swap I/Q yes > This gives 48khz on each side. > > BTW, Arie, try NaP3. It gives the same display as PSDR-IF but > apparently has no bugs; at least I've encountered none in 3 months of > continuous use. > > 73, Tony KT0NY > > > On Fri, Jan 20, 2012 at 4:52 AM, Stewart Rolfe <gw0etf@> wrote: >> >> I've set up my Softrock panadapter again using NaP3.... > > > -- > http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Aliases-in-Softrock-panadapter-display-tp7207106p7208572.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
