If your SR uses the 8192 xtal, then the global offset should be near -23000. All the other offsets should be set to 0 and let NaP3 poll the K3 for mode offsets. If you sidebands are reversed, just reverse your audio cables.
Larry N8LP On 1/20/2012 10:30 PM, elecraft-requ...@mailman.qth.net wrote: > Date: Fri, 20 Jan 2012 10:38:05 -0800 (PST) > From: k5oai<k5oai....@gmail.com> > Subject: Re: [Elecraft] [K3] Aliases in Softrock panadapter display > To:elecraft@mailman.qth.net > Message-ID:<1327084685686-7208572.p...@n2.nabble.com> > Content-Type: text/plain; charset=us-ascii > > I use LP-Bridge v1.02 and NaP3 with my K3 and softrock my Global settings > differ > Global offset has to be set at -23070 the rest are the same as Tony's. > > I have tried to use LPB2 v1.01 > and neither the -6000 or 23070 settings work for me > for starters receive is on the wrong side no matter which LSB or USB > and checking or un-checking I/Q shift doesn't fix it > after playing a while PERHAPS if I set the global for -6000 > and then played with each mode's setting individually, I could get it to > work > > much to much effort > I finally just settled for running > LP-Bridge v1.02 and NaP3 > works great. > > -- > ymmv > Sam Morgan > K5OAI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
