I can't seem to find this problem with 4.42. The Auto-notch seems to work well. Sometimes on 40M SSB I leave it on to get rid of the broadcast carriers. No complaints. 73, N2TK, Tony
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tony Estep Sent: Thursday, January 26, 2012 3:49 PM To: Tim Tucker Cc: [email protected] Subject: Re: [Elecraft] K3 Auto Notch distortion On Thu, Jan 26, 2012 at 2:32 PM, Tim Tucker <[email protected]> wrote: > I've noticed and observed this exact same thing while using MixW or DM780. > The auto notch doesn't kill the desired signal like it should - it > appears that it's "missing" on either side of the signal.... ========== Yep, it's really clear when you watch it on a waterfall. I see exactly the same thing Nate and Tim are seeing. It takes only a minute to test this and see the very clear result. It appears that the auto-notch is correctly finding the offending carrier, because there are equally-spaced attenuations on either side. But for whatever reason, it's not notching the same way the manual notch is doing. This is probably something that will get addressed in firmware in due course. Tony KT0NY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
