This worked for me so far. IF you can find a earlier stored configuration in your utility program which does not have the distortion in the NOTCH, you can just bring over your present or new configuration settings to the older configuration.
In other words, transfer the current settings to your older version which was stored in the config file in the utility program which did not have the corrupted auto notch file./ Apparently, the Auto Notch is flawed and has a bug, but you can do a work around using an older config file which does not have the distortion on the auto notch. Who knows how the Auto Notch gets corrupted, but for some reason the code can get messed up. If you don't have an older file to work with, then it gets harder. You have to do a Parameter Initialization which will cause you to lose all settings and even default settings. You will lose filter config plus the 100 watt amp. It will all have to be reset to your present configuration so recording down all your menu and config settings plus front panel settings is necessary. Refer to page 66 in the manual. Toby W4CAK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
