Thomas, If you are referring to the recent support for RemoteRig, the description of that function can be found at the Elecraft website - search on "RemoteRig". Either the RemoteRig, or a communications link to connect 2 K3s (the local K3 controls the remote K3) is what is needed. What is required is a communications link, and not any particular protocol.
If you are instead creating a control program to run on your computer and remotely control a single K3, then the K3 Programming reference is the documentation that you need. 73, Don W3FPR On 1/30/2012 7:00 AM, Thomas Horsten wrote: > Hi Elecraft list, > > I have read about the new K3 remote protocol (that's supported natively in > the latest firmwares of the K3), and I want to implement my own remote > control solution. However I haven't been able to find any documentation on > the remote protocol anywhere (implemented in Linux with software on a > Beagleboard acting as the backend to a GTK+ frontend emulating the user > interface on another machine in the network). > > Does anyone know if this documentation exists, and if not, when it will be > released? Apologies if there is an early beta/draft version of the protocol > documentation somewhere and I've missed it. If it's not out there, can > someone in the know provide me with a copy? > > 73, Thomas M0TRN > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
