Is it possibly on QRQ mode? On Mon, Jan 30, 2012 at 5:23 PM, Tommy Alderman <[email protected]>wrote:
> In tinkering with my K3 (s/n 4521)(Firmware 4.39) I have somehow managed to > disable the ability to select Lo/Hi Cut and I cannot get SHIFT to shift my > passband in the CW mode. Ironically both SHIFT and Lo/Hi Cut work fine in > other modes, so I feel pretty sure I have a parameter set incorrect. With > the LED's lit for SHIFT and WIDTH, in the CW mode, WIDTH works correct but > when I move my SHIFT control, VFO B display shows 'FC *0.54 (of course > 0.54 > is my pitch setting). > > I have been going through both the K3 manual and Fred's book but so far I > can find nothing that identifies my problem. > > Any help would be greatly appreciated! > > 73, > Tom - W4BQF > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
