Brian, That would be practical for the P3 and K3 because they share a common RS-232 port, but the KPA500 port must be different (or not connected at the same time), the KX3 port is different, the XG3 port is different, and so it goes on and on.
I think having everything batched into one would make operation more difficult. As a parallel, the XYL wants to have one remote control - and indeed I do have a remote that can learn any other remote's commands. But when I program it for multiple devices, we cannot easily remember which button is for which function on which device - so we go back to having multiple remotes on the coffee table. Sometimes dedicated applications for one device makes more sense. 73, Don W3FPR On 2/2/2012 5:50 PM, Brian Alsop wrote: > To take this a step further. Why not consolidate all the different gear > firmware programs into a single program? First screen would be to > select the device. > > 73 de Brian/K3KO > > On 2/2/2012 22:03, LA8AW wrote: >> My wish is a stand alone program that do --all-- the menu >> settings/configurations in the K3 like the extended menus in HRD (which >> seems to only have a limited number of menu configurations available). >> >> I find it strange that Elecraft doesn't do this in the K3 Utility......as >> long as the SW configuration of the K3 is getting quite complex. >> >> Is there any programming gurus out there who take the challenge...? >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
