Thanks to Dennis W1UE replying off-line to tell me how to find the CAT commands, it now looks like my logic may be incorrect. It appears like either GT0020, or GT0040 will turn the AGC off, but GT0021 turns on AGC-F, and GT0041 turns on AGC-S. If I understand this correctly, there is nothing incorrect in the HRD CAT command list. Please let me know if my understanding is incorrect.
Dick, n0ce ----- Original Message ----- From: Richard Fjeld To: elecraft posting Sent: Friday, February 03, 2012 10:43 AM Subject: K3 AGC off using HRD, Question I know this has been discussed, but I didn't see the following mentioned. I installed the latest HRD Beta V5b2893. The AGC still switches off at times on my K3. I noticed in the Options, Info CAT support, for K-3 radio, the AGC-off command for on/off is set to the same value. Logically, it looks like OFF should be OFF=GT0040. (I wanted to verify this with the K-3 CAT commands in my Elecraft literature, but I can't find any.) I am waiting to be accepted into the HRD Forum to post this. (It's been a few hours.) It could be quite awhile before it is corrected. In the meantime, could the f/w be temporarily modified to allow the user to null the AGC-off feature in the CAT commands (or radio) until it is changed in HRD? Dick, n0ce ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
