Here is another scenario: "You are operating at the scene of a disaster using a low antenna and low power while passing health-and-welfare traffic. You can hear the SSB station on the other end but it can't hear you very well. You would like to be able to listen on SSB and send on CW. What configuration menu item to you use to activate this cross-mode transmission?"
Fred Cady fcady at ieee dot org "The Elecraft K3: Design, Configuration, and Operation" www.ke7x.com > -----Original Message----- > From: [email protected] [mailto:elecraft- > [email protected]] On Behalf Of WILLIS COOKE > Sent: Friday, February 03, 2012 12:42 PM > To: Terry Schieler; [email protected] > Subject: Re: [Elecraft] K3: CW in SSB mode broken? > > Terry, my understanding is that this feature is used almost exclusively > by DXers on the VHF bands. I have never seen it used on the HF bands > even though it would be legal. It allows you to keep the receiver on > SSB while using the transmitter on CW. I have used it on HF to touch > up my amplifier tuning, but on HF there is no assurance that the other > operator is CW capable or will know what to do. Of course there is no > such assurance on VHF either, but it more likely that the other > operator has encountered the technique. I would not attempt it in an > HF SSB pileup. > > Willis 'Cookie' Cooke > K5EWJ & Trustee N5BPS, USS Cavalla, USS Stewart > > > ________________________________ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
