I can only guess that the red RCA from your foot switch is dead but you could 
determine that with an ohm meter. It should work as described.

KE4D has the more elegant solution, I just migrated all my cables from the old 
Kenwood when my K3 arrived and have been too busy operating to integrate all 
the 
K3 features into my station. In our case we'll have a red cable to coil up at 
the foot switch.

Jack - WE5ST




________________________________
From: "[email protected]" <[email protected]>
To: [email protected]
Sent: Sun, February 5, 2012 3:18:26 PM
Subject: [Elecraft] footswitch and amp

So, then, this begs a question. I have a K3 with an Ameritron AL-811H. 
I key the K3 with a Heil foot switch connected to a Heil ProSet 5. When 
I tried keying my amp off the red cable on the foot switch, I didn't get 
any amp keying. When I connected an RCA phono cable between the K3's 
key out jack and the amp's relay, everything works fine and dandy. Is 
there some setting on the K3 I missed to allow the amp to key from the 
foot switch instead of from the rig's TX?

Thanks and 73,

Ian Kahn, KM4IK
Roswell, GA


I'm not sure why you want to key the amp instead of the rig.  I ran an 811H for 
years with my Icom 746 Pro and my K2s with a footswitch to the radio connected 
to my ProSet 5.. Same way I now run my K2 and my KPA500.  Since I don't have a 
K3 (yet) I guess I might be missing something but since the amp, whether the 
811H or KPA500 doesn't key until the radio does, I wouldn't think this would be 
an issue.  And, I'm not sure how it would work keying the amp without the 
radio. 
Maybe because the KPA500 and K3 are basically symbiotic its not an issue but I 
certainly wouldn't have been able to use the IC 746 Pro or my K2 by keying the 
amp.  What am I missing?

John KE4D

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to