Hi Gary, group, Elecraft support, I think I have found a strong correlation between CW in SSB not working and the QRQ setting. Here follows:
To make CW in SSB work: set CONFIG:QRQ to OFF, power-cycle the K3. To break CW in SSB: set CONFIG:QRQ to ON, power-cycle the K3. 73, Frank PA4N At 21:36 31/01/2012, Gary Hinson wrote: >Hi Frank. > >I have the same problem: CW in SSB no longer works on K3#2887 running >firmware 4.39. I raised this on the reflector some months back and went >around the loop changing config settings, PTT, QRQ etc. I did manage to fix >it temporarily by restoring the K3 firmware configs, but annoyingly it has >packed up again since then. > >I *think* CW-in-SSB it might still work on some bands, not others. At >least, that's what I found last time I checked - I haven't checked lately. > >I suspect there might be a cryptic bug in the firmware (the best kind!). > >73 >Gary ZL2iFB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
