The local oscillator level at TP1 is 1.06 VDC (0.8 - 1.2) LNA at TP2 is 241 mV with R13 set at its limit (CW) R22 at its limit (CW) will just hit 20 W (PEP)
L15 peaks at 2 turns above the top of the can instead of two turns down. I'm suspicious that I may have the wrong capacitor at C53. The C53 is suppose to be 18pf. The only capacitor in the kit that has 18 anywhere on it is a huge (relatively speaking) triangular shaped capacitor that has three lines of text. The top line reads 18J The second line reads 1KV The third line reads 33 I could find no other capacitor that reads 18 or 180 with the kit. Nor could I find any capacitor that should read 33. So I assumed that this must be the right capacitor for C53, a substitute perhaps, but it should work. The way L15 peaked at 2 turns above the can, though raises some concern. I lack the know how to determine if everything is as it should be. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
