One of the more common sources of resistance are the various 'DC distribution' devices. They put at least two additional connectors and sometimes switches and fuses into the circuit. Also cables with inline fuses often add excessive resistance if the fuseholder isn't high quality. Incidentally, in a fixed (not mobile) application, only the positive line should be fused.
On 2/27/2012 9:00 AM, Jim Brown wrote: > On 2/27/2012 6:48 AM, Lee Buller wrote: >> The volt meter says 14.5 volts. NaH! So, I went >> to the K3 internal meters and got the following >> >> 100 watts out >> 22.5 amps >> 11 volts > > IR drop in the DC cable will account for much of the difference. > > 73, Jim K9YC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
