Tom, You have too many devices involved to say whether this is a problem with your setup and cables or whether it is a K3 problem.
Do you have anything connected between the Microkeyer and the K3 PTT input? If you are going to get PTT to the K3, you must have something connected to the PTT input. The other modes can use VOX to initiate transmit - my guess is that you have VOX set on for CW and RTTY, etc. and not for SSB. Do you have the correct microphone jack (front or rear) selected? Describe your setup in more detail, we do not have enough information to do any more than make guesses. 73, Don W3FPR On 3/2/2012 9:17 AM, Tom wrote: > I have this set up and am using the MicroKeyer cable set that has the > mic input on the back of the rig. I have the Proset plugged into the > RJ45 adapter that plugs into the back of the MicroKeyer and provides > the 8 pin mic connector. I have the correct Heil to K3 adapter > cable. I have a push to talk button that is plugged into the Heil > adapter. The problem is that when I push the button the radio does > not key. > > Other modes (CW, RTTY, etc) key the rig ok. > > Any ideas? > > Tom > KQ5S > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
