> Wayne's suggestion that there may be a way to send an RTS signal to the > GPIO > connection on the tip of the ACC2 plug is very intriguing, and I am just > trying to > figure out what interface cable(s) I would use and what I would need to > build to be > able to maintain the ACC1 operation along with the amp activation through > the ACC2, > while adding the RTS line from somewhere to the tip of the ACC2 cable ;-)
Lance, what's the advantage of using the KX3's GPIO pin for PTT over the PTT line on the mic connector? You have to plug-in the audio cables for WSJT anyway and need a separate line for PTT on the computer side anyway, too. The only advantage I could see is you do not need an adapter on the 4 pin (TRRS) mic connector of the KX3, but that's about all. ;-)) Hw? Vy 73, Olli - DH8BQA http://www.dh8bqa.de/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
