On 3/5/2012 8:09 PM, km5ps wrote: > I have been noticing that on 10 meters when I bypass the internal tuner > I get a High Current error message. On my amp meter on my Astron 35m > pwr supply it shows that when I key up about 22 amps and then keeps > rising up to about 35 amps and then cuts itself back. When I use the > internal tuner on k3 it does not do this. It shows about 22 amps on amp > meter. This is the only band that I have noticed this on. The swr of > antenna is about 1.3:1 for ten meters. Any suggestions on what might be > wrong? > > John > KM5PS > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html I did not mentioned that the test was with 100 watts. When I drop it back to 90w or lower it does not do this.
John ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
