Something lurking in the future too... one of the empty cutouts on the back of the P3 is: "Sensor"
73 Bill N2BC (waiting for P3SVGA - then SENSOR) -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of nr4c Sent: Wednesday, March 07, 2012 8:47 AM To: [email protected] Subject: Re: [Elecraft] P3 monitoring transmit? I thought it was in the manual. But I can't find it this morning. If you unplug the serial cable from the radio (either end)you will be able to see your transmitted signal. you may have to adjust scaling, ref level to get trace you want. It does work fairly well. I think this 'feature' will be dealt with a lot better in a future formware release after the P3SVGA card ships so keep watch. ...bill nr4c On Tue, 6 Mar 2012 17:45:57 -0600, David F. Reed wrote: > I am wonder if it is possible to look at your transmitted signal with > the P3; I only see the receive side. If so, how? > > Thanks & 73 de W5SV, Dave > > Sent from my iPad > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
