Jacob, Try setting 8R Hold ON. It sounds like it is set to NOR right now and with your extended T-R delay, you are hearing the receiver unmute before the delay time is finished. See the K2 manual page 89.
73, Don W3FPR On 3/10/2012 11:20 AM, jacob chambers wrote: > Cheers; > > I have noticed that when keying my K2 with the crystal filter cinched (200 > hz-400) and my audio filter ON in either mode 1 or 2 (the K2 analog CW > filter) in certain situations I get an annoying pop or "pssst" sound when > sending. I have serial no. 2676 QRP K2 that has had the keying mod performed. > I normally use 5 watts with a .12 ms transmit/receive delay. i I built the > audio filter to spec and it all tested fine. Any ideas on what I could do to > mitigate this minor annoyance? > > 73; > Jacob K4JQV > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
