Greg,
Not the case ... setting level on one band then changing bands results
in the new level on all bands. Not a good situation when the noise
floor varies from -140 dBm on 50 MHz to nearly 100 dBm or more on 1.8
MHz.
73,
... Joe, W4TV
On 3/13/2012 1:48 PM, Greg wrote:
> Detlef,
>
> Maybe this got reset by the download? Please adjust by band as needed
> then shut everything down. Turn it all back on and see if your
> settings were retained.
>
> Thanks
> Greg
>
>
> On 3/13/12, Detlef Fischer<[email protected]> wrote:
>> Hi to all,
>> Downloaded the new P3 Version 1.11. All works fine except the REV LEV
>> values are not stored per band any more. The level is equal on each band.
>>
>> Some wrong with my P3 or is it a bug?
>>
>>
>>
>>
>> Detlef / DK1KL
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
