Lee, 1). Put the KSB2 components on the front panel before mounting the pots on the FP board. 2). Install all option headers as you build the RF Board - I use jumpers in the headers instead of the jumpers on the board - (unmodules would work too). 3) Other than the above, follow all instructions in order.
OK, that is how I do it, and I have built many K2s (really havn't counted), so keep in mind I am very familiar with the process - If you feel uncomfortable about your ability to find a problem should it arise, then just do the instructions one at a time just like they are printed in the manual and ignore the way I do it. Yes, the manual is THAT good - it is even better than it was when you built your last K2. 73, Don W3FPR > -----Original Message----- > > Elecraftians..... > > If you were going to build another K2 (and I know > there are many of you who have built quite a few) what > things would you do differently from the first build? > > Lee Buller - K0WA > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.9.5/58 - Release Date: 7/25/2005 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
