I wanted to share a very successful procedure to remove one of the flat head 4-40 cover screws from my K3. The screw head was damaged beyond use. There was a long thread on the subject last year and one poster suggested using a left hand drill bit. I purchased a 3/32" left hand bit, chucked it into my hand drill, masked off the screw to avoid any cover damage, drilled very slowly, and 5 seconds later the drill bit with the entire screw was in my hands. The threads of the 2-D fastener were totally undamaged and a new screw was easily put into place. My thanks to the poster that made the recommendation.
73, Mike K2MK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Stuck-Screw-Removal-tp7398577p7398577.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
