I've noticed the same thing -- in tracking mode, but not fixed mode. I don't know the reason for it and I'm pretty sure that there's nothing you can do about it. You might see if you like fixed mode, which I greatly prefer.
On 3/23/2012 4:15 PM, W6NEK wrote: > Hello fellow owners of the P3SVGA Display Board, I must be missing a menu > setting. > Whenever I tune either the main or sub VFO the external VGA average pan > display trace > drops from -120 dbm to -135 dbm all the while the VFO is changing frequency. > This > makes it all but impossible to visually tune to a weak CW signal by just > watching the > VGA pan display as you tune the VFO. Each time I stop tuning the pan display > jumps > back up to the -120 dbm reference line and all the weak signals once again > appear in > the pan display. This does not happen on the small screen pan display. Is > there a > separate menu adjustment that prevents the VGA pan display level from > dropping -15 dbm > when the either receive VFO is tuned? I just know I have something set up > wrong in the > menu system. > > Any input welcome, Frank - W6NEK > > ______________________________________________________________ Elecraft > mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email list: > http://www.qsl.net/donate.html -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
