Toby, I've noticed the same issue. The color of the translucent band is less intense (or saturated, or whatever -- it's harder to see).
Also, it is not centered correctly -- there is more color on the left than on the right. I reported the centering issue as a bug, but I was thinking maybe the color problem had something to do with my monitor settings and was intending to check that. On 3/26/2012 9:49 AM, Toby Pennington wrote: > > Yes, I mean 200hz . Actually, the green cursor changes to a dull color > barely > visible from 150hz to 50 hz. Changing the Span to 10hz will keep this change > from > taking place and the cursor will stay green from 150hz to 50hz. > > 10hz is a very narrow Span, but it is the only way I could find to keep the > cursor > very visible. I have tried everything with the menu on the P3 and also on the > monitors, ( I tried two different ones ) I have changed resolution, etc. > Nothing > seems to change this except changing the Span. It is not a bothersome issue > since I > would normally only tune the bandwidth down that low after I am in contact > with > someone, and then the position of the cursor is not an issue. > > However, I would like the cursor to retain its color and visibility. > Toby W4CAK > > > Toby, > > I assume you mean 200 Hz? > > At any rate, I can turn mine down to the minimum (50 Hz) and still see the > green line. > It's fairly dim at that width but still visible. > > Perhaps you can adjust the color and or contrast on your monitor to bring it > out. > > Rick K6LE -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html