You can change the filter centre frequency in any mode by using the SHIFT control. Tapping this control will switch between SHIFT/WIDTH and LO/HI CUT modes, and will also briefly display the current FC or LO setting in the VFO B display. The default or "normal" FC is marked with an asterisk (*).
The default filter centre frequencies in CW and in AFSK A/FSK D can be adjusted using the K3's PITCH control. Assuming you are using sound card software for PSK31, you will likely be using DATA A mode. The default filter centre frequency in DATA A is 1500 Hz. The PITCH control is not available in DATA A. As a side comment, the SPOT control does produce a tone in DATA A, but the tone it produces is not at FC, it is at the CW sidetone pitch, which is irrelevant in DATA A. 73, Rich VE3KI KC6CNN wrote: > I have to set my center mark frequencies for CW, PSK31, and RTTY. > > CW is 600. Rtty is 2125 I think, But what is the center frequency on PSK31. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
