I have read the PDF manual as published at the Elecraft website and followed the P3SVGA threads here on the reflector am still unsure of the power requirements other than I'll need to connect it to a power source that supplies 700ma and the K3 aux only provides 500ma.
So, if I install the P3SVGA do I have to always use the power cord to the non-K3 12vdc power source? In other words, can I turn the P3SVGA board off somewhere in the P3SVGA menu and subsequently use the K3 aux 500ma power supply? I ask because I could envision a situation where I'd like to have the K3&P3 and not necessarily an external monitor and power amp. If the answer is no, then to be clear I would have to remove the P3SVGA board before I could use the K3 aux power outlet again. Is that correct? Thanks in advance. Scott KF5MHS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
