Try calibrating the watt-meter on 10m, or set the K3 to only 90 watts or so on 10m. It is probably actually putting out more than 100w and I have seen some draw excessive current on 10m when it you go above 100w. Keith
On 4/6/2012 1:05 AM, Bryan, ZL1NI wrote: > On 28.010 while in Tune a high current warning came up then a 15A fuse > went in my Astron power supply. My MFJ-259 shows SWR less than 1.5 at > this frequency. The antenna is a new SmallIR. > I have since operated my FT-897 on the same antenna and frequency. I can > key down at 100W as often as I like and for as long as I like and > nothing bad happens. Rig indicates a low and stable SWR putting out 100W. > This seems to suggest something related to the K3. Has anyone else > experienced this? > > Bryan, ZL1NI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
