Page 13 of the KPA500 manual explains this. You need to change the Radio Menu selection from K3 to BCD. That will disable attempts to communicate with a K3 and enable the band buttons.
Jack B, W6FB Elecraft Engineering On Apr 8, 2012, at 9:18 PM, WA6KEK wrote: > Thank you very much for the response Mike. I had a clear understaning going > into this that the KPA was not going to send data to my rig. It was just not > spelled out that the band buttons would be inop. It certainly makes sense > that they would be. > 73 Alan WA6KEK > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/KPA-500-Band-buttons-inop-while-rig-is-connected-to-Aux-port-tp7448434p7448739.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
