John, Due to your time differences, I would suggest emailing [email protected].
73, Don W3FPR On 4/11/2012 8:07 PM, VK7JB wrote: > Hello Again, > > Well, the PTT IN problem persists. > > I can confirm that the K3 is not in TEST mode and that the VOX/PTT parameter > is definitely set to PTT. > > I've taken the top of the rig and checked that all the rear panel hardware > is still connected and in place. > > PTT on the front panel mic connector and the XMIT front panel button work > normally. It's still only the rear panel PTT IN that's the problem. > > Anywhere else I should look before I call support @ Elecraft? > > Thanks to all who replied via pm with helpful suggestions, > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
