Greetings list, I recently added the W2 to monitor the power output at M0PCB on HF and VHF with the K3 and amplifiers. For this it is great, I particularly like the speed at which it reacts to the output power.
I am in the process of adding an external transverter so i can make use of my K3 and P3 on the 70MHz band, and that got me thinking about the W2. 1) I know the DCHF-200a is specified to 54MHz but how would the unit perform up to 70.5MHz? 2) As I already have the DC2000a and DCV/U-200a sensors attached is there an easy way to add a third sensor to the set-up? I realise I could add another W2 to the shack but that seems overkill and I can certainly more easily justify a 3rd sensor above a 2nd W2 at the present time. Will try to look out for any responses to the list, but I use the daily digest and am prone to skim reading ;-) Many thanks for any input, and thanks to Elecraft for a great radio. 73, Iain M0PCB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
