I came across a bug which will most likely put my efforts for a windows p3 application on hold: It concerns the markers. I first found this in my program itself, but I can reproduce it with RealTerm which is an async terminal program. Basically, when it works it goes like this: (I alternate the frequencies manually to show an effect)
I enable the marker: #MKA1; The correct marker frequency shows up on both the SVGA and P3. I then issue a #MFA+00018100000; (for an example) This shows up on both displays I then issue a #QSY1; which is supposed to put the K3 at the marker frequency. I then issue a #MKA0; and the markers turn off This works 3 maybe 4 sometimes 8 times then the following happens: I enable the marker: #MKA1; The correct marker frequency shows up on both the SVGA and P3. I then issue a #MFA+00018100000; (for an example) This shows up on both displays I then issue a #QSY1 and now things change drastically. The SVGA screen shows the marker frequency as the original frequency before the #MFA+00018100000 The P3 Screen shows MRK A: 0 (not the frequency) and the frequency does not change. When the #MKA0 is issued, the P3 marker is gone, but the " MKA Frequency" text on the P3 remains. At this point, it seems to never get better, unless I fiddle with the controls on the P3 itself. Any ideas of a work around? It's really too bad, I'm almost set to go. Thanks for any help. Tom VA2FSQ -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-Programming-bug-tp7488122p7488122.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
