Don, Your problem may just be HRD/DM780. I no longer use it, but I do recall it did not handle the K3 Data sub-modes correctly.
I would suggest using AFSK-A sub-mode for RTTY rather than DATA A. It does default to LSB, allows use of the dual-tone filter, and indicates the mark frequency on the dial. MMTTY will work just fine if you want something more simplistic than DM780 for RTTY. 73, Don W3FPR On 4/22/2012 7:59 AM, [email protected] wrote: > Dear Group, > > RTTY is supposted to be LSB and PSK on USB. > > If you have the K3 in DATA A mode does it matter. Once you tune into > the signal and my system decodes I would suspect that I am fine. > > From what my brain is telling me is that a RTTY signal that is posted > if you are in DATA A and its in USB then all I need to do is turn lower > in FRQ to find the signal and all shoud be good. > > What am I missing if anything with the RTTY. Will it have a big effect > on RX decode or TX to someone else. > > The reason that I am asking is I just realized the LSB issue yesterday > and now I am thinking that may be part of my problem where I have poor > RTTY decode and ability to make weak contacts. Other digital modes > like PSK and JT65 work just fine with the system. > > I am using the HRD suite of software with DM780 in case that matters. > > Otherwise everything works fine, so its more of an education issue for > operator not a K3 problem. > > Cheers have a great weekend. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
