Thanks for the replies, The K1 manual doesn't mention the side bolt, as I could tell.
But I was sure someone had a KST2 manual. I'm good to go, now. Regards, Rick AA4W -----Original Message----- From: Don Wilhelm Sent: Wednesday, April 25, 2012 09:01 To: Rick Lloyd Cc: [email protected] Subject: Re: [Elecraft] K1 Stand Screw Size Rick, According to the KTS1 manual, it is 10-32. Both the diameter, and the thread pitch must match. Common hardware at the DIY store may be 10-24. 73, Don W3FPR On 4/25/2012 8:50 AM, Rick Lloyd wrote: > Hello all, > > I have a K1 and I’m building a bracket to tilt the rig on my desk. > > I am having trouble figuring out the size of the screw for the side of the > radio. > > I’m thinking it’s a #8 but it starts tight and I’m afraid to force it. > > Anyone know the proper screw? > > Thanks, ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
