Just one caveat that Joe has mentioned several times. Do not use the MicroHam interface for loading firmware - that is when you need your USB to serial cable connected to the P3 in place of the MicroHam interface RS-232 cable.
73, Don W3FPR On 4/30/2012 6:13 PM, Joe Subich, W4TV wrote: > microHAM interfaces *replace* any other connection to the computer. > > With K3/P3, the RS-232 connection from the microHAM interface is > connected to the "computer" jack on the P3, the radio jack on the > P3 connects to the K3. Set K3, P3 and Router all to 38.400 bps. > > 73, > > ... Joe, W4TV > > > On 4/30/2012 6:05 PM, [email protected] wrote: >> Hola, >> >> K3 is connected to the P3 and P3 goes to USB hub on back of computer for >> logging program. How do I include the RS232 to the MkII? Does it require >> a Y cable for the RS232 or a hub connection like a Belkin? The reason >> for the MkII is to allow MTTY and PSK macros and to use keyboard cw keying. >> >> I cant find anything in the P3 documentation nor on the Microham website >> under support. Before hooking up the P3, I used the MkII for both >> Logger32 and N1MM for contesting. >> >> 73 >> Tom >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
