I was going thrugh the manual today, and it seems that a fixed audio output is 
missing entirely from the KX3, why?
Fixed audio output is important for us who routinely run digimodes.
There is also a lack of a separate audio input, which is just as important when 
running digimodes.
 
So to run digimodes, it seems to me that I will have to disconnect the 
microphone and connect a suitable audio interface to the mic connector, and 
also to the speaker/headphone output, then I need to adjust the mic gain 
and the speaker volume on the KX3, and then do similar adjustments on the 
interface/PC. Quite cumbersome, when it all should have been included in an ACC 
connector on the KX3.
Both the FT-817 and the IC-703 have miniDIN connectors on the back with audio 
in, audio out and PTT, something similar would have been a big advantage on the 
KX3 when running digimodes.
 
When microphone and headphone jacks are used for digimodes, it will mute the 
speaker, and it will make it take unnecessary long time to change from 
digimodes to SSB/CW and vice versa.
 
Yes, I know that the KX-3 utility program supports CW, RTTY and PSK-31 through 
the digital interface, but that program is kind of limited in functionality and 
modes. On the FT-817 and IC-703 and others as well, it's just a matter of 
changing the frequency and the mode (if the Data modes are employed).
 
I think this is a real shortcomming on the KX3!
 
Will it be possible for a future upgrade to the KX3 to install a miniDIN (or a 
separate jack) to accommodate a fixed level audio output, audio input and PTT 
input? (Yes, I understand that drilling or case replacement will be involved is 
such an upgrade.)
 
The best upgrade will of course be a built-in USB Interface with and integrated 
USB sound card, like the IC-7600, TS-590 etc...
  
Martin Storli 
LA8OKA
Oslo, Norway 
 
ARCTICPEAK's Radio pages! 
http://www.arcticpeak.com/radio.htm
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to