Just wondering "out loud" on this. Could firmware be added for the KX3 under the data modes to set the audio gain to a fixed value? This would provide the desired levelized audio output with no hardware upgrades or addition.
Connecting to the baseband audio has already been addressed in the current design. This does not address transmit audio issues but there seems a couple alternatives for that (mic input or GPIO and only requires an external pot for setting level). I have already offered to come up with an I/F "critter" for those that want to use computer-based soundcard sw (but told to hold off I bit until more have the radio). 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-? DUBUS Magazine USA Rep [email protected] "Kits made by KL7UW" http://www.kl7uw.com/kits.htm ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
