Hi Ray, You should be aware of something that affects CW RX Equalization. On very narrow DSP widths the RX EQ is turned off. I believe it turns on at 150Hz and wider and it is off for 50 and 100Hz. Because of this, you never want to set any of the equalization values to a positive DB on CW. Only use zero or negative values. Let's say your CW pitch is set to a value between 400 Hz and 800 Hz and you set the 400 Hz and 800 Hz RX EX adjustments to +6db. Then when you turn the DSP width to 100Hz or less you would notice a 6db decrease in audio level.
73, Mike K2MK Ray G3XLG wrote > > I wonder if there any recommendations for the initial settings to try for > both the CW and SSB modes in the K3 ? > > 73 de Ray G3XLG > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Recommendations-for-Receiver-Audio-Equalisation-tp7523604p7524728.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
